untitled

Thiết bị lấy mẫu bụi TSP; PM10; PM 2.5

Giá: Liên hệ

Model: DS10/ DS 25/ DS1 Nhà sản xuất: Kanomax – Nhật Bản Xuất xứ: 1   Yêu cầu báo giá Danh mục: Thẻ: , , , , , ,

Hỗ Trợ Khách Hàng

Mr. Thạch 0943 66 44 00028.66 570570024. 32 009276

HCM: 50 Tân Thới Nhất 21 – P. Tân Thới Nhất – Q.12 – Tp. Hồ Chí Minh

HN: Tầng 8, Tòa nhà SanNam, 78 Duy Tân – P. Dịch Vọng Hậu – Q. Cầu Giấy – Hà Nội

Mail: thach.hoang@vietnguyenstore.com

-          Accurate and affordable real-time outdoor particulate monitoring.

-          The Dust Sentry provides real time, continuous particle measurement of TSP, PM10, PM2.5 or PM1 with datalogging and alarm relay outputs. Numerous integrated options including SMS and/or email notifications, weather sensors, noise and mounting equipment make the Dust Sentry a flexible base system suitable for a wide range of applications.

-          Compared to reference-equivalent monitors like TEOMs and BAMs which lack sensitivity at short sampling periods, the Dust Sentry reports accurately at 1 minute intervals and has a much lower total cost of ownership (up to 5x less). In addition, the Dust Sentry is compact, re-locatable and can integrate wind and weather sensors for maximum utility.

Applications
 
  • Roadside PM surveys
  • Nuisance dust detection
  • Industrial site compliance monitoring
  • Construction / mining sites
  • Community exposure studies
  • Workplace monitoring
  • Smoke / biomass burn-off
 
Features and Benefits:
 
  • Real time particle monitoring, Measures and reports data in 1 minute intervals
  • Accurately measures TSP, PM10, PM2.5 or PM1
  • On board data storage for up to 15 years of data
  • Web-based and GSM data retrieval and alerts
  • Gravimetric filter
  • Option to integrate weather, wind, temp/RH sensors, and sirens
  • Tough weatherproof enclosure with solar shielding for hot climates
  • Quick installation and relocatable
 
Specifications
 Model #  DS 10  DS 25  DS 1
 Measurement technology  Near forward light scattering nephelometry
 Range  0-2000µg/m3
 Accuracy  +/-(2 ug/m3 +5% of reading)
 Cut point  PM 10  PM 2.5  PM 1
 Sample flowrate  2.0 LPM
 Inlet  Heated
 Alarm  Relay and SMS (optional)
 Datalogging  2GB SD card (>15 years data storage)
 Reference filter  25mm GF filter
 Software  Datalogging and configuration software included
 Outputs  RS232 & cellular IP Gateway
 Mounting  Pole and wall mounting
 Wireless communication options  Low power RF modem
 Meteorological sensor options  Temperature & RH sensor, Gill WindSonic, Vaisala WXT520
 Environmental operating range  -10°C to +45°C; 10 to 95% RH (NC)
 Power requirements  Mains (100 to 260VAC) or regulated 12VDC (10W)
 Enclosure  Lockable & weatherproof GRP cabinet IP65; 685 x 350 x 300mm (including solar shield armour & mounting brackets)
 Weight  less than 12kg