- Bơm lấy mẫu khí, lưu lượng: 100 – 250 LPM
- Ứng dụng:
- The VOPV-10 Digital High-volume Air Sampler is intended for air sampling on filter media with adjustable flow rate. It is used for the sampling and consequent evaluation of radioactive aerosols, particulates, and other compounds in the contaminated air. The radioactive pollutants retained on the filter can be subsequently analysed in a laboratory and the nuclide specific volume activities can be calculated. Considering its high performance, low maintenance demands and simple operation, the VOPV-10 air sampler can be utilised as follows:
- sampling unit for the operative activity measurements of aerosols and iodines in working and outdoor environment air
- sampling unit for continuous activity measurements (and reporting) of aerosols and iodines in air taken from ventilation stacks
- sampling unit in outdoor environmental monitoring stations
- sampling unit for low-energy applications
- Mô tả:
- Depending on the purpose, an appropriate filter (material), filter holder (size), and VOPV-10 model (flow rate) can be determined.
- By means of motor speed regulation, the sophisticated airflow control system provides a sustained pre-set air flow, regardless of filter fouling.
- The air sampler can operate in any chosen mode: occasionally / periodically / continuously.
- Several standard models are available varying by flow rate for particular applications: The models with a flow rate up to 30 m3 /h (17.67 cfm) are intended for aerosol sampling (using standard FPM cloth filters), and the models with a flow rate from 1.5 to 5 m3 /h (0.88 to 2.94 cfm) are intended for iodine (and aerosol) sampling.
- Optionally, the VOPV-10 air sampler can be supplied with a customized air flow rate range and customized filter holder.
- The maximum flow rate could be limited by type and dimension of assigned filter.
- A powerful centrifugal pump provided with an efficient high-speed brushless motor, which is controlled by a micro-processor, is the primary component of the VOPV-10. A flow-meter, control unit, keyboard, and back-lit graphic display are also included.
- Standardly, the suction and exhaust sections are connected to hoses of an internal diameter Ø32 mm (1¼ in) by quick-acting couples.
- The current airflow, total sampled volume from system start, sampled volume in selectable time interval, total number of operational hours from start, pressure and temperature of a sampled medium, status and error messages, and the real time can all be clearly seen on the display.
- VOPV-10 usually works in an autonomous mode (the airflow is controlled by a built-in control unit), or, optionally, it can be connected to a host system and controlled by an external PC via RS-485 (optionally RS-232) interface. VOPV-10 can work in automatic mode for periodic sampling at pre-defined time intervals.
- The system is equipped with many sophisticated functions. The control unit provides, amongst others, simple adjustment of the desired airflow, automatically holding the desired airflow, motor overload protection, automatic restart after power supply failure recovery, etc. The sampler is produced for portable installations. Optionally, it is supplied with straps and strap fixtures for easy transport.
- Tính năng:
- Powerful vacuum pump with efficient highspeed brushless motor, allowing very high volumes of air to be sampled in very short time; with a long lifespan, higher reliability, lower maintenance costs
- Possibility of continuous operation and both indoor and outdoor use
- Programmable sampling intervals
- Regulation of the motor power according to the pressure difference on the filter, permitting the flow rate to be constant despite of rising of filter pollution
- Easy control
- Optional data display and unit control remotely from a host system
- Thông số kỹ thuật:
- Available negative pressure airflow of 20 m 3 /h (11.77 cfm):10 kPa (75 mmHg)
- Standard medium junction: quick-acting couples hose Ø 32 mm (1¼ in)
- Control display graphic display: 128 x 64 dots
- Connectivity to host PC (option): RS-485 (Canon 9 pin)
- Dimensions (L x H x W) (without filter holder): 310 x 195 x 170 mm (12¼ x 7⅝ x 6¾ in)
- Weight: 4.2 kg (9¼ lb)
- Power: 24 VDC, max. 10 A
- Medium temperature: -10 ~ +40 °C (+14 ~ 104 °F)
- Ambient temperature: +5 ~ 40 °C (41 ~ 104 °F)
